LabVIEW Real-Time Idea Exchange

Community Browser
Top Authors
cancel
Showing results for 
Search instead for 
Did you mean: 
Post an idea

Many developers have the primary ethernet port of their development computer reserved for the corporate intranet/internet access.

Unfortunately, MAX and other tools like RT System Deployment Utility expect the targets to be connected to the same primary port for initial configuration, because they do not allow the specification of a local IP on which to exchange the UDP configuration packets.

Being able to select the ethernet port on which the RT system is connected, e.g. through a ring control populated with all available NICs and their local IPs, would facilitate devolopment enormously in such constellations, because the developer would not need to switch cables and IP configurations every time he needs to reconfigure the RT system.

 

Thanks,

Sebastian

Allow MAX to set the time and date to RT targets

As cRIO's are deployed in ever growing applications, it would sure be nice if there was an option to use SFTP (and disable FTP altogheter) on the controller. Ideally it would be supported at the OS level, i.e. the existing cRIO FTP server is upgraded or extended to include SFTP as well.

 

If this is already supported, try searching for "sftp" or "crio sftp" and you'll see only one 3rd party tool-kit, but I confirmed with that company (Labwerx.net) that it (labSSH) does not support cRIO/FPGA/RT targets and there are no concrete plans to add support to other targets.

 

NI: I call on you to either create the FTP toolkit I need to write my own SFTP server, or better yet, update the cRIO FTP server to include the "s". . . It is only one letter, how hard can that be!? 😉 Smiley LOL

 

If this is already possible through some (obscure?) way, please update your site-search engine to reckognize sftp and/or crio sftp, and/or link to a KB or Whitepaper on the topic as I did not find any.

(Note: cRIO safety and security IS covered in pretty good detail in the article series starting with Overview of Best Practices for Security on RIO Systems and the linked 3 articles.)

hello;

 

For the NI 6008 card sampling frequency equal to 10 kS / s and it has 8 analog inputs, but if I will use the 8 analog inputs simultaneously, what is the value of the new échantionnage frequency for each input analog obtained during an acquisition in labview?