LabVIEW Real-Time Idea Exchange

About LabVIEW Real-Time Idea Exchange

Have a LabVIEW Real-Time Idea?

  1. Does your idea apply to LabVIEW in general? Get the best feedback by posting it on the original LabVIEW Idea Exchange.
  2. Browse by label or search in the LabVIEW Real-Time Idea Exchange to see if your idea has previously been submitted. If your idea exists be sure to vote for the idea by giving it kudos to indicate your approval!
  3. If your idea has not been submitted click New Idea to submit a product idea to the LabVIEW Real-Time Idea Exchange. Be sure to submit a separate post for each idea.
  4. Watch as the community gives your idea kudos and adds their input.
  5. As NI R&D considers the idea, they will change the idea status.
  6. Give kudos to other ideas that you would like to see in a future version of LabVIEW Real-Time!
Top Authors
cancel
Showing results for 
Search instead for 
Did you mean: 
Schott

SDXC card support for cRIO 9031 Linux Real Time

Status: New

The cRIO9031 with Linux Real Time did not support SDXC cards. Only SDGC with a maximum of 32GB supported by cRIO.

For logging application their is a need for more than 32GB => use of SDXC cards with 128/256 GB

 

2 Comments
BradM
Active Participant

Hi Schott,

 

Unfortunately, Linux does not have native (in kernel source) support for the exFAT filesystem (required for a device to be labled SDXC). As soon as such a filesystem is supported in Linux, we can enable direct support for exFAT.

 

In the meantime, there is nothing preventing you from formatting the card in a filesystem type that is supported on the target. FAT32 is unfortunately the most portable, accessible format, of course if you don't need to access the contents of the card from a Windows machine, you can use some of the tools on the RT controller to format the card in a more robust, journalling filesystem such as EXT4.

Schott
Member

Hi Brad,

 

thanks for your comment.

I switched to EXT4 file system and start using some windows tools for formating and read the sd card.

 

But i think there will be more cRIO users running into this problems. Using a Windows PC for developing LabVIEW Code and using Linux cRIO with Linux File Sytem.

And there is no note in the system spec about the file system format of the sd cards.