Does your idea apply to LabVIEW in general? Get the best feedback by posting it on the original LabVIEW Idea Exchange.
Browse by label or search in the LabVIEW Real-Time Idea Exchange to see if your idea has previously been submitted. If your idea exists be sure to vote for the idea by giving it kudos to indicate your approval!
If your idea has not been submitted click New Idea to submit a product idea to the LabVIEW Real-Time Idea Exchange. Be sure to submit a separate post for each idea.
Watch as the community gives your idea kudos and adds their input.
As NI R&D considers the idea, they will change the idea status.
Give kudos to other ideas that you would like to see in a future version of LabVIEW Real-Time!
I have just gone through a somewhat painful support process to figure out how to adjust something as simple as the analog channel scaling on a NI-9203 module installed in a cRIO rack. Why there is no external way to adjust those properties, besides having a development system hooked up and accessing them through the Project Explorer, is a little baffling. After going a little round and round on the support call, it came down to this: modify your embedded program to include property references, where you can adjust the scaling programmatically. That means I need to modify my code, rebuild the executable, email it to the customer, get them to shut their entire line down, put the cRIO in the "don't run your startup VI" mode, upload the new program, restart, then finally get their entire line back up and running. All because they need to change the scaling on one 4-20mA analog channel from 0-400 to 0-500 units to match their PLC control system changes.
Seems like there should be a way to get into that configuration, maybe in MAX? We can see the cRIO processor, but can't get individual module or channel configurations. Distributed System Manager might be another place that properties could be adjusted. Anything to make the cRIO simpler to support in the field!