LabVIEW Real-Time Idea Exchange

About LabVIEW Real-Time Idea Exchange

Have a LabVIEW Real-Time Idea?

  1. Does your idea apply to LabVIEW in general? Get the best feedback by posting it on the original LabVIEW Idea Exchange.
  2. Browse by label or search in the LabVIEW Real-Time Idea Exchange to see if your idea has previously been submitted. If your idea exists be sure to vote for the idea by giving it kudos to indicate your approval!
  3. If your idea has not been submitted click New Idea to submit a product idea to the LabVIEW Real-Time Idea Exchange. Be sure to submit a separate post for each idea.
  4. Watch as the community gives your idea kudos and adds their input.
  5. As NI R&D considers the idea, they will change the idea status.
  6. Give kudos to other ideas that you would like to see in a future version of LabVIEW Real-Time!
Top Authors
cancel
Showing results for 
Search instead for 
Did you mean: 
Mads

Make it possible to change IP configuration on the fly

Status: In Development

Current workaround through NI Linux RT and Sys Config API: https://decibel.ni.com/content/message/103853#103853

Changing the IP setup currently requires a restart. It is now possible to change the configuration of all network interfaces programmatically using the System Configuration API, but it's not possible to put such changes into effect on the fly, so you actually have to shut down your application to put the changes into effect, something that might not be allowable.

 

So let's say e.g. that I have a controller with dual network interfaces and I want to reconfigure one of the network interfaces (turn on DHCP e.g.) - but I do NOT want to stop the RT application, because it controlls processes via other interfaces, and those processes must be kept alive. If it was a Windows PC, I could have done it. On an NI controller, which is ironically then typically used for more critical tasks, I cannot.

1 Comment
Deborah_B
Active Participant
Status changed to: In Development

Current workaround through NI Linux RT and Sys Config API: https://decibel.ni.com/content/message/103853#103853

Deborah Burke
Senior LabVIEW Product Manager
Certified LabVIEW Architect
National Instruments