LabVIEW Idea Exchange

About LabVIEW Idea Exchange

Have a LabVIEW Idea?

  1. Browse by label or search in the LabVIEW Idea Exchange to see if your idea has previously been submitted. If your idea exists be sure to vote for the idea by giving it kudos to indicate your approval!
  2. If your idea has not been submitted click Post New Idea to submit a product idea to the LabVIEW Idea Exchange. Be sure to submit a separate post for each idea.
  3. Watch as the community gives your idea kudos and adds their input.
  4. As NI R&D considers the idea, they will change the idea status.
  5. Give kudos to other ideas that you would like to see in a future version of LabVIEW!
Top Authors
cancel
Showing results for 
Search instead for 
Did you mean: 

Build button in Application Builder Dialog should save project before build

Status: New

I have run into the problem from time to time that I create a new build specification in my project, hit the Build button in the setup dialog just to have the build hang or crash LabVIEW. To add insult to injury when I opened the project file again (sometimes even after recovery) that new build specification was not there since the project was not saved before building.

I have now trained myself to resist the temptation of hitting that Build button. Instead I will exit the dialog, save the project and then start the build via a right click.

 

I would really like to see the project file being saved before the build is executed. 

4 Comments
Active Participant

Maybe have a dialog that asks if you want to save the project before you build - like the dialog box that TestStand shows asking you if you want to save your files first when you try to run a sequence...





Copyright © 2004-2018 Christopher G. Relf. Some Rights Reserved. This posting is licensed under a Creative Commons Attribution 2.5 License.
Member
I had considered putting that in, but I was wondering whether that would bug too many people since they now had to press two buttons.
Knight of NI

It might be sufficient to internally force an autorecovery snapshot before each build.

 


LabVIEW Champion. It all comes together in GCentral GCentral
Knight of NI

Good suggestion Heiko.  And good to see you at this forum.

 

I've had the similar issue happen once to me, using LV8.5 when building an executable for BTI.

 

I'm like you, I have to remind my right index not to click on the Build button (which is tempting) until the project is saved.  Even placing a save button near the build button would be fine.

 

Talk to you soon.

 

RayR

______________________________________________________________________