LabVIEW Embedded

cancel
Showing results for 
Search instead for 
Did you mean: 

samsung mini2440 win ce gpio keypad interfacing

hi i am using mini2440 samsung board support pakage (bps) using win ce 5.0 and want to interface a keypad through gpio

 

can i use labview 7.1 if possible then please specify the helpful material

 

 

regards

 

Engr. Mohazzab JAVED 

0 Kudos
Message 1 of 12
(13,260 Views)

Hi Mohazzab,

 

You can use the LabVIEW PDA Module to develop applications for Windows CE Devices.  Take a look at this DevZone Tutorial for more information:

 

http://zone.ni.com/devzone/cda/tut/p/id/4577 

0 Kudos
Message 2 of 12
(13,242 Views)

thankyou for your interest smoothatic

 

 

i get a lot of help from your  link

 

 

just tell me one more thing that can i use labview pda module for samsung mini2440 bsp (ARM-920) 

0 Kudos
Message 3 of 12
(13,231 Views)

Hi Mohazzab,

 

The LabVIEW PDA Module is designed to work Windows Mobile devices and not Windows CE devices.   Unfortunately, I do not think that you will be able to use the LabVIEW PDA Module with your samsung mini2440.  

Justin Parker
National Instruments
Product Support Engineer
0 Kudos
Message 4 of 12
(13,206 Views)
You can use NI LabVIEW Touch Panel Module, it works. But to control GPIO, you have build a dll which you can call it from NITPM.
0 Kudos
Message 5 of 12
(13,014 Views)

Dear all..

I want to create a lab view which can be run on mini2440.
For the Lab view Application i want to use dll. which includes some basic functions.
so which programming language i have to use to create dll.

please help ..


thank you ...
sunil

0 Kudos
Message 6 of 12
(9,705 Views)
0 Kudos
Message 7 of 12
(9,694 Views)

Dear Marand,,

 

Thank you very much for your information...

 

Can you Do me one help.

if you know how to create serial port dll in VC++ then please help me ..

 

 

Thanks and regards

Sunil

0 Kudos
Message 8 of 12
(9,684 Views)

Hi everyone,

 

Do you have any suitable driver for mini6410?

0 Kudos
Message 9 of 12
(7,167 Views)

Hi Azmi,

 

Thank you for posting in the forums. For visibility, you may want to create a new forum post, since this one is a few years old. Additionally, since we don't make the mini6410, National Instruments has limited resources on how the device is able to interface with our products, but you may have better luck if you contact that manufacturer. 

 

Tina K.
Applications Engineering
National Instruments
ni.com/support
0 Kudos
Message 10 of 12
(7,146 Views)