09-30-2010 03:34 PM
Last year, I purchased a Stellaris LM3S8962 development kit because it was a tier 1 supported device. I then found that LabView only supports programming this device through a ULINK2 JTAG device that costs about $300. I'm a Grad student, and that's too much for me right now.
I purchased a unit that claimed to be a ULINK JTAG on ebay, but I found that it was just a clone of an earlier device, and is not supported either.
Is their any way that I can configure Labview to work with what I have? I have a Masters project involving PID loop control, and I'd really like to use LabView embedded to generate the code for my Evaluation board. (Without dropping 300 clams on a JTAG)
Thanks in advance,
Scott Livengood
Indiana State University
09-30-2010 05:37 PM
09-30-2010 05:57 PM
Thanks Evandro,
I will give this solution a try this weekend.
12-11-2010 11:59 AM
Scott
I also have a project that I am interested in testing without a large upfront investment. Were you able to get your project and the generated code uploaded to your evaluation board? If so, was it a success?
Thanks
Ty S.
04-06-2011 02:48 AM
Most of Luminary development board have on-board simulator. CoIDE and CoFlash supports Stelaris ICDI, maybe you can use the board directly.
01-15-2012 09:58 PM
On the project icon, right click New then Targets and Devices... Select "EK-LM3S8962 USB" rather than ""EK-LM3S8962" and you can use just the USB cable for downloading and debugging. By debugging I mean you can have debugging on and see indicators and modify control values.
07-24-2012 08:13 PM
I'm from Argentina, I have a plate LM3S8962 and I find it very expensive to buy a ulink2, can be programmed using the USB port on the motherboard? and how to do it. please need help for my thesis is engineering
07-24-2012 08:18 PM
What is a plate LM3S8962? That is, what does plate mean?
If using the EK-LM3S8962 development board from TI it is easy to do as mentioned above.
07-24-2012 10:22 PM
sorry for my English, if I use ek-LM3S8962. Failure would be too much trouble, could you explain to me in Spanish, because my English is very weak. Thank you very much and greetings from Argentina
07-24-2012 10:52 PM
Uso de la EK-LM3S8962 sin el cable de ULINK2 JTAG es fácil. Es decir, usted puede usar el cable USB.
En el icono del proyecto, haga clic con nuevos objetivos, a continuación y de los dispositivos ... Seleccione "EK-LM3S8962 USB" en lugar de "EK-LM3S8962" y se puede utilizar sólo el cable USB para la descarga y depuración. Por la depuración quiero decir que puedes tener un depurador y ver los indicadores y modificar los valores de control.
Saludos desde Sydney.