LabVIEW Automotive Ethernet

Re: ARXML Support

Hi All,

 

I just purchased an PXIe-8521 automotive ethernet card for my PXI Chassis and I was wondering if there any plan to support ARXML in the same way as XNET supports DBC files? 

 

For example right now I have a 6 CAN buses connected to my CGW(Central Gateway) via a PXIe-8510 XNET CAN card, all those CAN buses have matching DBC files that define the various frames and signals that will be transmitted and received on each bus and from this I can simulate my whole CAN network and do a breadth of testing in this way. Things like frame route testing via the CGW, routed frame latency testing, throughput testing etc.

 

My question/concern now is, how do I do the same for the 100BASE-T1 automotive ethernet interfaces on my CGW which have ARXML files that define their behavior? I would like to be able to do the exact same type of testing on these interfaces as I do on the CAN interfaces but I need a way to first extract the data from the ARXML file like I do the DBC file and secondly I need to be able to convert the RAW ethernet frame that I get from the XNET read function, into actual payload data.

 

Any ideas? Perhaps this is already supported and I have missed it?

 

Thanks

Message 11 of 17
(169 Views)
Highlighted

Re: ARXML Support

Hi, as pointed out earlier in this thread of you want to use AUTOSAR arxmls on both CAN and Ethernet an option is to use AKKA's PROVEtech: RBS Add-on. It will be available on the tools network in November for CAN and December for ethernet.

 

Andreas Stark
Senior Transportation Systems Engineer
Message 12 of 17
(151 Views)

Re: ARXML Support

Well this seems very "un NI like". So do we need to purchase this toolkit? The Ethernet card itself is pretty useless with library's to support it for testing purposes. Will we be able to use the purple database input wire for Ethernet connections like we do on CAN with this 3 party library? In other words can we open an output session in Ethernet using an ARXML database as an input and transmit certain frames?

 

Thanks

0 Kudos
Message 13 of 17
(107 Views)

Re: ARXML Support

Hi jkerrigan12,

 

Currently NI-XNET does not natively support .ARXML databases for FlexRay or Ethernet. Support for these are planned for future releases, including significant update to .ARXML support for CAN and LIN. If you’d like to discuss our future roadmap, we can set up a discussion through your account manager.

 

The PXIe-852x interfaces currently only support the Frame Stream Session types, with more to be added in future software update. The future enhancements will use the same database input wire as other NI-XNET interfaces. More information on the current support is available here: NI-XNET 19.1 Help: Using Ethernet

 

Depending on your application, you may be able to use either the XNET Endpoint or the OS network stack for communication. In general, I suggest you reach out our Technical Support Engineering team who can provide guidance.

 

In addition to support NI provides directly, Alliance Partners also offer their own implementations of support. There would not necessarily use the same API as the NI-XNET driver. Andreas provided an example of a toolkit from AKKA which is targeted at HIL applications and the partner has been developing for the PXIe-8521. Other partners such as measX have presented on work with OEMs using NI and AUTOSAR architectures. These options are not directly supported by NI and are supported by the partner.

 

Best,

Evan See
National Instruments
0 Kudos
Message 14 of 17
(74 Views)

Re: ARXML Support

I recently came across this,

Basically we won't use the NI-XNET palette when we have this AKKA driver(AKKA uses XNET drivers underneath).

It works as below.

1) Open a AKKA Software GUI and it is like a configurator, select all interface properties(CAN Port, Ethernet Port, baud rate, etc), give the dbc files, arxml files as an input to this configurator.

2) Finally configurator creates and .config file as output.

3) Call some AKKA VIs and give this file as input, and use some vis to start the restbus and some vis to set/get signal values during runtime, stop restbus.

It is somewhat similar to usage of config file from a canoe and start the measurement from labview.

0 Kudos
Message 15 of 17
(45 Views)

Re: ARXML Support

Hi Karthickk,

 

Where did you find AKKA's configurator with Ethernet Port? I cannot find it in their RBS config (shown attached)

 

0 Kudos
Message 16 of 17
(33 Views)

Re: ARXML Support

Hi Bristolli

       Full functionality for loading ARXML file is not yet available i think.

     I hope it will be available when it is released in NI tools Network or before

But before that, i saw an option

if you have an RBS config file (.xml file) loaded with your arxml file and if you want option to select the interface port name.

Goto C:\Program Files\AKKA\PROVEtechRE\cfg\CFG.exe (wherever you installed)

Open CFG.exe File>Open Configuration> AutomotiveEthernet>Select the HW port name there and save and try it.

0 Kudos
Message 17 of 17
(12 Views)
Reply
This is an open group. Sign in and click the "Join Group" button to become a group member and start posting.