LabVIEW Automotive Ethernet

ARXML Support

Anyone working on ARXML with labview? 

0 Kudos
Message 1 of 10
(630 Views)
9 REPLIES 9

Re: ARXML Support

I would be interested in this also. Vector's CANoe software has this out of the box... I feel NI are a little behind on AUTOSAR topics

0 Kudos
Message 2 of 10
(620 Views)

Re: ARXML Support

What exactly do you need? Do you want to parse the file to get some PDUs and signals out do you want to setup a full restbus simulation?

 

If you happen to attend NI Week there are some sessions about it

 

Automotive Communication Bus Session Series: AUTOSAR and Automotive Ethernet

  • Explore a new automotive Ethernet offering from NI and learn how AKKA and NI create restbus simulations according to AUTOSAR requirements for devices under test with CAN/CAN-FD, LIN, FlexRay, and automotive Ethernet bus communication. Then hear about measX's case study at DAIMLER et. al.

 

http://niweek.ni.com/events/niweek-2019/custom-169-d97121d09fd640009495a009a677af56.aspx

 

 

Andreas Stark
Senior Transportation Systems Engineer
0 Kudos
Message 3 of 10
(610 Views)

Re: ARXML Support

Yes, I just want to parse the content of the ARXML File and I need to setup a restbus simulation, I cant able to attend the sessions in person, if you share the materials once the event is completed will be appreciable, Thanks
0 Kudos
Message 4 of 10
(591 Views)

Re: ARXML Support

Hi Andreas, 

 

Yes the two use cases for us would be

1. Parsing pcap traces and using the usual XNET functions as is currently possible with CAN dbc

2. Creating restbus simulations, including SOMEIP, DoIP etc

 

I will look into attending NI week, thanks for the link

0 Kudos
Message 5 of 10
(586 Views)

Re: ARXML Support

To work with SomeIP topic, considering you can deal with ARXML file, the below link will be useful

https://forums.ni.com/t5/LabVIEW-Automotive-Ethernet/SOME-IP-Client-Server-Examples/gpm-p/3702326?pr...

0 Kudos
Message 6 of 10
(578 Views)

Re: ARXML Support

I'll post the link once available.

Andreas Stark
Senior Transportation Systems Engineer
0 Kudos
Message 7 of 10
(567 Views)

Re: ARXML Support

Hi Jack, 

 

when you say 


1. Parsing pcap traces and using the usual XNET functions as is currently possible with CAN dbc


do you mean reading the raw frames from pcap and converting them into PDUs/signals and service communication?

For restbus including SOME/IP AKKA's PROVEtech:RBS AddOn for LabVIEW and VeriStand might be a good fit (currently in development, AUTOSAR stack based on their product PROVEtech:RE).

DoIP is supported by the NI Automotive Diagnostic Command Set, but only low level access to diagnostics. If you need a full ODX runtime you should consider a 3rd party software.

Andreas Stark
Senior Transportation Systems Engineer
0 Kudos
Message 8 of 10
(563 Views)

Re: ARXML Support

This is the link to the NIWeek presentation -> AUTOSAR Restbus Simulation

https://forums.ni.com/t5/NIWeek-Session-Content/Automotive-Track-NIWeek-2019/ta-p/3929243

Andreas Stark
Senior Transportation Systems Engineer
0 Kudos
Message 9 of 10
(378 Views)
Highlighted

Re: ARXML Support

Thanks for the link Andreas, there's some interesting information there. Sorry for the delay getting back to you.

 

do you mean reading the raw frames from pcap and converting them into PDUs/signals and service communication?

 

Yes exactly, we have raw ethernet frames that we aquired from a vehicle with the NI PXI 8521 and would like to be able to read vehicle speed etc from this using the arxml that our customer supplied us. This was quite easy in the past for other OEMs that used CAN by using the supplied dbc. We configured an XNET session with the dbc. The list of signals array determines which signals we would like to extract

configure_XNET.PNG

Then using the configured XNET Session we could convert RAW CAN frames to an array of signals

xnet_convert_Raw.PNG

 

 

0 Kudos
Message 10 of 10
(218 Views)
Reply
This is an open group. Sign in and click the "Join Group" button to become a group member and start posting.