Instrument Control (GPIB, Serial, VISA, IVI)

cancel
Showing results for 
Search instead for 
Did you mean: 

why don't I have the visa tab in my m&a explorer

Hello,
I have an older version of the measurement and automation explorer 3.1.0..... and the ni488 driver SW version 1.7 on one labtop and there I scan for instruments and the PZ4000 is found and I doubleclick on the Instrument0 and I get the VISA tab to give the device a proper name....
no I try on the other labtop with m&a version 4.0.0... and the ni488 version 2.42 --> I scan for instruments and the PZ4000 gets found, but the VISA tab is not available any more....
how can I give a name to the device, where is the visa field???
both labtops are on the labview version7.1
 
mfg
 
Alexander Schallert
 
p.s. could you please send the answer also to the mail address: alexander.schallert@at.atb-motors.com
0 Kudos
Message 1 of 3
(3,248 Views)
It sounds like you didn't install VISA on the second laptop. In MAX, expand the software listing and see if VISA is there.
Message 2 of 3
(3,245 Views)
I have yokogawa pz4000 power analyzer, I need to get data from it using a computer, my problem is I don't have the software(powerViewer older version installed), and it must be installed before installing the upgrade version.
 
I would like to be helped if you have the software, or any relevant help.
 
please forward your replay to      jabustho@gmail.com
0 Kudos
Message 3 of 3
(2,110 Views)