Instrument Control (GPIB, Serial, VISA, IVI)

cancel
Showing results for 
Search instead for 
Did you mean: 

rms unstable measurement with 5411

Highlighted

Hi all,

 

I observe unstable rms and peak-to-peak values between measurements using 5411 and 5620 (both located in a pxi) when the frequency is a multiple of two.

 

Example:

 

With this array of frequencies is: 2,3,4,5,6,7,8,9,10MHz the Vrms and Vp2p values that I read everytime for 2, 4, 8... are unstable. The higher the frequency, the higher the variarions. I manage to workaround the problem by not using frequencies multiple of 2, like e.g.: 1.9, 2.8, 3.7,4.6, 5.5, 6.4 7.3, 8.2, 9.1, 10MHz but I still would like to understand why. Does this have anything to do with the internal clock signal, harmonic distorsion maybe?  

 

Thanks in advance.

 

Kind regards,

Teresa Cruz

 

0 Kudos
Message 1 of 2
(966 Views)

Hallo,

 

I found some information about your problem. You can check that and hope that it will be useful. Let me know if it was helpful for you.

 

http://forums.ni.com/t5/LabVIEW/rms-value-measurement/m-p/482750

 

Best regards,

 

0 Kudos
Message 2 of 2
(949 Views)