Using LaBview to make a signal generator generate a waveform with simultaneous sine and pulse

[XHLL]

 Hi

 How to use LaBview to output a continuous sine waveform, and add a pulse wave when the sine wave stops outputting, and it can be repeated periodically?

 Thanks

  xia

[Albert.Geven]

Which instrument do you use for generating a waveform.

LabVIEW only generates the voltages,  you need hardware to make it work

[altenbach · Accepted solution]

LabVIEW (not LaBview) is a programming language that can also be used to control instruments, given the correct drivers.

If you have a programming questions, you should ask in the LabVIEW forum. Maybe as a first step you could program a hardware free simulation of these signals to figure out all the logic.

If you have a question about controlling your instrument, you are in the right place. However, you need to give details about your hardware.