Instrument Control (GPIB, Serial, VISA, IVI)

Showing results for 
Search instead for 
Did you mean: 

Using LaBview to make a signal generator generate a waveform with simultaneous sine and pulse

Go to solution


屏幕截图 2022-08-23 163451.png


 How to use LaBview to output a continuous sine waveform, and add a pulse wave when the sine wave stops outputting, and it can be repeated periodically?




0 Kudos
Message 1 of 3

Which instrument do you use for generating a waveform.

LabVIEW only generates the voltages,  you need hardware to make it work

greetings from the Netherlands
0 Kudos
Message 2 of 3
Accepted by topic author XHLL

LabVIEW (not LaBview) is a programming language that can also be used to control instruments, given the correct drivers.


If you have a programming questions, you should ask in the LabVIEW forum. Maybe as a first step you could program a hardware free simulation of these signals to figure out all the logic.


If you have a question about controlling your instrument, you are in the right place. However, you need to give details about your hardware.

0 Kudos
Message 3 of 3