From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
I have some problem. I have the programmable power supply (RS232)
and DAQ to collect Sensor datas. The DAQ sample rate is set to be
0.01Hz.
But when i try to set ON,voltage and current of the power supply
there is delay of 100sec.(the same with DAQ collect data). I tried the
power supply out and inside of the loop with DAQ.
Any one can help me... to make ON and set current and volatge with out any time delay.
Yes it is 100sec. But being my process is slow process i have to collect the data per 100secs. What i need is to make the power supply functional with out delay time (to make it ON/OFF , set volatge and current)
It certainly won't work with your existing code and a sample rate so low. Post the code with the separate loop. That should work so you need to show it so someone can understand your mistake.