Instrument Control (GPIB, Serial, VISA, IVI)

cancel
Showing results for 
Search instead for 
Did you mean: 

URGENT GPIB DOS DRIVER HELP

Highlighted
I purchased a PCI-GPIB card for my lab's NT machine and now have to run
some DOS software which is not able to access the GPIB card! National
Inst. said that they have NO DOS DRIVERS.

Does anyone have DOS drivers for the PCI-GPIB card from NI???


thanks-- jonathan



Sent via Deja.com http://www.deja.com/
Before you buy.
0 Kudos
Message 1 of 2
(2,093 Views)
Highlighted
You already have them, but they are not enable by defualt. Go to Control
Panel, Device Manager and open Properties for the GPIB board. There's a
checkbox to enable DOS support.

thierman@my-deja.com wrote:

> I purchased a PCI-GPIB card for my lab's NT machine and now have to run
> some DOS software which is not able to access the GPIB card! National
> Inst. said that they have NO DOS DRIVERS.
>
> Does anyone have DOS drivers for the PCI-GPIB card from NI???
>
> thanks-- jonathan
>
> Sent via Deja.com http://www.deja.com/
> Before you buy.

--
Best Regards,
Mike T

Mike Tranchemontagne
Consulting Applications Engineer
TeraComm, Inc.
148 Main Street
Building A, 3rd Floor
North Andover, MA 01845
877-900-TERA (8372)
978-557-9490 (FAX)
603-598-4773 (Dir
ect Line and Cell)
0 Kudos
Message 2 of 2
(2,093 Views)