Sending data serially from one port to another using VISA read/write.

archit0392 · ‎04-14-2015

Hi,

I have found a program o Labview through which one can communicate on a single port using a loopback adapter.

But now I need to serially communicate between 2 different ports using labview..Plzz help

crossrulz · ‎04-14-2015

It works the same way as a single port, you just need another loop to handle the second port.

There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
"Not that we are sufficient in ourselves to claim anything as coming from us, but our sufficiency is from God" - 2 Corinthians 3:5

Dennis_Knutson · ‎04-14-2015

So what exactly is your problem? You use a null modem cable and use two different VISA Resource Names. This should be a simple modification. Show what you have done. Check the examples that come with LabVIEW. What's the point of doing this?

Instrument Control (GPIB, Serial, VISA, IVI)

Sending data serially from one port to another using VISA read/write.

Sending data serially from one port to another using VISA read/write.

Re: Sending data serially from one port to another using VISA read/write.

Re: Sending data serially from one port to another using VISA read/write.