Home Community Discussion Forums Most Active Hardware Boards Instrument Control (GPIB, Serial, VISA, IVI) Topic

Instrument Control (GPIB, Serial, VISA, IVI)

cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

:SENS1:CORR:COLL:SAVE "DONE" don't work for E5071B

:SENS1:CORR:COLL:SAVE "DONE" don't work for E5071B

‎10-16-2008 07:28 PM

Hi,

After I do OPEN, SHORT and LOAD Cal. I need to send aother command to SAVE or DONE after the cal.

I used :SENS1:CORR:COLL:SAVE it give me an error <ERR>agena Error Query; instrument reports:+20,"Additional standard needed"+0,"No error" 😞

Can some one help me to solve this problem.

 

thanks in advance... 

0 Kudos
Message 1 of 2
(2,836 Views)
Reply

Re: :SENS1:CORR:COLL:SAVE "DONE" don't work for E5071B

‎10-17-2008 04:19 PM

Hello,

 

This error sounds like the commands that you are sending aren't what the device expects.  Have you verified that the device needs the commands in this order and without a time delay?

Caleb W

National Instruments

0 Kudos
Message 2 of 2
(2,812 Views)
Reply