Instrument Control (GPIB, Serial, VISA, IVI)

cancel
Showing results for 
Search instead for 
Did you mean: 

Request for Packaging information

Hi,

This is Prashant Dhavale from Flex.

We are currently working with one of our manufacturing plant to collect Pin 1 orientation, Tape pitch and width, Package for below MPNs.

Site: Senai medical          

                            

MFR MPN Tape Width (mm) Tape Pitch (mm) Pin-1 Orientation
NATIONAL INSTRUMENTS NAT7210BMF-9      
NATIONAL INSTRUMENTS NAT7210BPDF-9      

 

Note: Pin-1 Orientation is the position of pin 1 on component placed in Tape and Reel.
Below image given for more understanding on Pin-1 in General Orientation in T&R.

Prashant111_0-1613567092819.png

 

 

Prashant111_1-1613567092823.png

 

 It will be of great help if you can provide us the info at the earliest as this information is required very urgently.

0 Kudos
Message 1 of 2
(109 Views)

This is something you would need to ask your sales representative. This forum is mainly for NI SW and HW products. General users usually don't deal with the semiconductor products from NI.

-Santhosh
Semiconductor Validation & Production Test
Soliton Technologies
0 Kudos
Message 2 of 2
(79 Views)