06-08-2018 04:53 AM
Hi all
I have a problem with my SMU (NI PXIe-4139), I was programing under LabVIEW normally then I have an error that says "Internal hardware error occurred in Power_Supply hardware. Please contact National Instruments Support.
Component Name: Nimxslu Proxy
File Name: This is NOT an error in nimxslu. See nimxsl/TStatus2KernelProxyWrapper. cpp For information Line Number: 290 "And when I checked out on MAX I found another NI PXIe-4139 device that added as shown in the photo I'm joining and I have this error that appears " status Code:-235140
Internal hardware Error occurred in Power_Supply hardware. Please contact National Instruments Support. "So do you have any idea what's going on?
06-11-2018 09:35 AM
Hello Jazz94,
I think you need to upgrade your NI DCPower to a more recent version because of this bugfix:
http://www.ni.com/product-documentation/53996/en/?OpenDocument
You can find a more suitable version (after 14.1.2 ) here:
http://search.ni.com/nisearch/app/main/p/bot/no/ap/tech/lang/en/pg/1/sn/catnav:du/q/NI-DCPower/
I hope this helps! Have a good day,
Regards
Corentin