Instrument Control (GPIB, Serial, VISA, IVI)

cancel
Showing results for 
Search instead for 
Did you mean: 

PCI-5112 windows does not have driver associated

Solved!
Go to solution

Hello,

 

I received a digitizer PCI-5112 and need to install it on a lab computer for our experiments. When I open NI MAX, it says " windows does not have driver associated with your device." Then I downloaded several drivers such as NI-Scope, DAQmx. But none of them get the device driven. 

 

I saw some post says that this device is too old. Is there any way to run this device? 

 

Another question: I installed the board following the steps in "NI High-Speed Digitizers" manual. Is it correct to install PCI-5112 as described there? The slot was mounted with PCI-6221 and it works. The reason we want to change is for faster data acquisition as PCI-6221 gets data from one channel smaller than the real. 

 

Thank you very much.

0 Kudos
Message 1 of 10
(1,253 Views)

PCI-5112 needs the NI-Scope driver. 

It should work as long as you've one of the driver versions per this table, try selecting Update driver in Device Manager, that might force Windows to search for the driver again.

 

santo_13_0-1702519511152.png

 

Santhosh
Soliton Technologies

New to the forum? Please read community guidelines and how to ask smart questions

Only two ways to appreciate someone who spent their free time to reply/answer your question - give them Kudos or mark their reply as the answer/solution.

Finding it hard to source NI hardware? Try NI Trading Post
0 Kudos
Message 2 of 10
(1,245 Views)

Thank you very much Santo, I'm going to try and see if it can be driven.

0 Kudos
Message 3 of 10
(1,208 Views)

I downloaded NI-SCOPE3.5.0 and found that includes drivers for 5110, 5111, and 5113, having 5112 skipped exactly. The device manager can find it but says no drivers as well. 

 

😂 

0 Kudos
Message 4 of 10
(1,205 Views)

Do you mean '3.5.0' or '23.5.0'? what version did you install and what OS?

Santhosh
Soliton Technologies

New to the forum? Please read community guidelines and how to ask smart questions

Only two ways to appreciate someone who spent their free time to reply/answer your question - give them Kudos or mark their reply as the answer/solution.

Finding it hard to source NI hardware? Try NI Trading Post
0 Kudos
Message 5 of 10
(1,193 Views)

I installed 3.5.0 NI-Scope. In the "readme" file, it does include PCI-5112. But the OS is too old. My PC is windows 10. 

 

3-5-0 for 5112.png

0 Kudos
Message 6 of 10
(1,186 Views)
Solution
Accepted by xwang0329

For Windows 10, you need at least NI-Scope 16.0, and v3.5 may not work with Win10 as it was tested only for 32-bit versions.

Santhosh
Soliton Technologies

New to the forum? Please read community guidelines and how to ask smart questions

Only two ways to appreciate someone who spent their free time to reply/answer your question - give them Kudos or mark their reply as the answer/solution.

Finding it hard to source NI hardware? Try NI Trading Post
0 Kudos
Message 7 of 10
(1,176 Views)

Thank you very much. I'll see if NI-SCOPE 16 works and update here. 

0 Kudos
Message 8 of 10
(1,162 Views)

I got a new computer and I'll install an older version of Windows in 32-bit. I'll update here if it would work. Thank you

 

Best,

X

0 Kudos
Message 9 of 10
(1,108 Views)

Here is the latest update:

Summary: it worked.

 

It requires: NI-Scope installed on 32-bit Windows System and NI-scope 16.0 to be installed as the driver is needed. 

Windows 10 doesn't have 32-bit systems as far as I've tested. 

 

Hopefully, this info is helpful. 

0 Kudos
Message 10 of 10
(991 Views)