Instrument Control (GPIB, Serial, VISA, IVI)

Showing results for 
Search instead for 
Did you mean: 

NI 9146 as modbus slave ?

Is is possible to configure a NI 9146 ethernet expansion chassis as a modbus slave ?

0 Kudos
Message 1 of 3

Hello ppberube,


You'll need to add a controller to your NI 9146 to turn it as a RT Target. Then, install DSC module. Please check this link.




Message 2 of 3

Thank you very much for answering, it confirm that i need a Controller, not only a Expansion chassis, because it needs to be a RT target in order to be set a modbus slave.


Best regards !

0 Kudos
Message 3 of 3