From 11:00 PM CDT Friday, Nov 8 - 2:30 PM CDT Saturday, Nov 9, ni.com will undergo system upgrades that may result in temporary service interruption.

We appreciate your patience as we improve our online experience.

Instrument Control (GPIB, Serial, VISA, IVI)

cancel
Showing results for 
Search instead for 
Did you mean: 

My PCI 6341 AO Channel is not Functioning

I was experimenting in real-time and using AO Channel 02 of PCI 6341. It was working fine but suddenly I got some error and the voltage at the output of the channel went to a constant value of 13.3V.

 

I performed a self-calibration test it failed.

Then I used DAQ Diagnostic Utility and it showed me that my AO is functioning properly. 

UmairMech_0-1706523513471.png

 

How to solve this problem? 

And why does this kind of problem occur? 

0 Kudos
Message 1 of 5
(880 Views)

Hello there,

 

You said 


It was working fine but suddenly I got some error and the voltage at the output of the channel went to a constant value of 13.3V.

Can you please provide the error code/message that you got?

Message 2 of 5
(846 Views)

I didn't get any error at that time, but when I went to NI MAx >> Devices and interfaces and wanted to do self-calibration I got the following error 

 

UmairMech_0-1707367822702.png

 

0 Kudos
Message 3 of 5
(842 Views)

Looks like you damaged the analog output somehow. Seems like you’ll have to contact NI technical support to arrange a RMA so they can repair it.

Rolf Kalbermatter
My Blog
0 Kudos
Message 4 of 5
(812 Views)

I agree with Rolf. It seems like the output doesn't function properly. Please contact NI Support.

0 Kudos
Message 5 of 5
(791 Views)