From 11:00 PM CST Friday, Feb 14th - 6:30 PM CST Saturday, Feb 15th, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
From 11:00 PM CST Friday, Feb 14th - 6:30 PM CST Saturday, Feb 15th, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
10-25-2022 04:31 PM
Hi everyone!
We are attempting to get a new P5004A Keysight Streamline USB Vector Network Analyzer integrated into our test rack. I'm able to communicate with the VNA via Keysight's IO libraries. However, I'm unable to get the VNA to show up in NI Max. Since it's USB, I was hoping it would be bound to a COM port but it's not. The VNA is listed in Windows Device Manager under a special Keysight section.
Any ideas?
10-25-2022 06:32 PM
Maybe that is the clue, maybe it is not a USB-COM port but instead a USB Raw port that can be accessed only though their Keysight IO libraries.
10-27-2022 01:17 PM
It turns out there are some secret sauce settings. An applications engineer with Keysight provided this document to configure the VNA for NI Max.
10-27-2022 01:23 PM
Good to know, learnt a new thing HiSLIP