Is it possible to configure your own driver for the EISA-GPIB card.

[DXA71]

If I use the NI-488DDK source code package can I configure my own driver for the interface of the NI EISA-GPIB card and HP VEE 6.0 on the HP-UX 10.2 platform.

[Ryan_M]

There is a downloadable driver for the EISA-GPIB developed for HP-UX available from
http://www.ni.com/support/gpib/versions.htm
or
ftp://ftp.ni.com/support/gpib/hp-ux/at-gpib/

The GPIB-HP700-EISA is basically a GPIB kit that includes the driver and the EISA-GPIB board. National Instruments is no longer developing a driver for the HP-UX environment for this board so if you have any extreme difficulty using the older driver or updating it, we recommend upgrading to a GPIB-ENET module.