Instrument Control (GPIB, Serial, VISA, IVI)

cancel
Showing results for 
Search instead for 
Did you mean: 

I2C and SPI with PXIe-6363

Solved!
Go to solution

Hello,

 

our NI PXIe-1078 chassis houses a PXIe-6363 I/O card which has hardware timing capabilities as far as I know. Is it possible to communicate from this card to an I2C or SPI device directly from the chassis instead of using FPGA? The PXIe-6363 features multiple digital I/O ports and there is the palette:

"Connectivity"=>"I2C&SPI" which contains the I2C Configure.vi and the SPI Configure.vi. However both require FPGA functionality.

 

Thanks in advance

Lysandros



0 Kudos
Message 1 of 2
(2,748 Views)
Solution
Accepted by topic author Lysandros

Hello Lysandros,

 

unfortunately you will need an FPGA Device or an dedicaded I2C or SPI Device.

 

Best wishes

 

--------------------------------------------------------------------------------------------------------
Work with NI Hard- and Software for about 15 years now.

Certified LabVIEW Developer & TestStand Developer/Architect

--------------------------------------------------------------------------------------------------------

There are only two ways to tell somebody thanks: Kudos and Marked Solutions
0 Kudos
Message 2 of 2
(2,722 Views)