Instrument Control (GPIB, Serial, VISA, IVI)

cancel
Showing results for 
Search instead for 
Did you mean: 

How to configure sampling rate for Tektronix TDS6124C

Hi all

 

I am using tektronix TDS6124C oscilloscope to monitor the signal at ethernet port

 

I am unable to configure the Sampling rate and no.of samples for the scope

 

Kindly can anyone send me an example for configuring the sampling rate.

 

Thanks

 

With regards

Bala

0 Kudos
Message 1 of 4
(1,686 Views)

Are you using the driver ? The commands would also be in the manual.

0 Kudos
Message 2 of 4
(1,677 Views)
Highlighted

Hi Dennis

 

Thanks for your reply

 

Yes i am using the drivers and i am unable to configure.

 

I am using the examples given with the drivers and if i change the time base in the code it is not reflecting in the scope

 

If you have any examples kindly send me if possible

 

With regards

Bala

0 Kudos
Message 3 of 4
(1,659 Views)

Hello Bala,

         I have a TDS 5104 at my desk and ran the "Acquire Multiple Waveforms Example" and changing the timebase worked correctly.  Without changing the default value, the scope's screen showed 800 ns/pt, and when I changed the timebase from 0.005 to 0.05, the scopes screen displayed 8.0 us/pt.

 

Please try that example and only change the timebase the same way that I did and tell us how many s/pt the scope's screen displays.

 

Cheers,

 

NathanT

0 Kudos
Message 4 of 4
(1,650 Views)