Dirver of MTX393 multimeter

[Ayoubas01]

1-Im looked for a driver to my MTX3293, wich is connected with a USB cable I can't find it ? 

2-and if does not exist how can i get it ?

3- Can I acquire data from my multimter with VISA Only without the driver ? 

Thank you for all

[Albert.Geven]

Hi

Probably yes if it supports a serial interface via usb. That should be readable in the manual.

If you have an english manual or poiint to  download page I can take a look.

[Ayoubas01]

Hi 

thank you for answering my question, you will find attached the document for remote progamming of the MTX3293

[santo_13]

Good that the manual is clear and the commands are like SCPI.

This is a good tutorial on communicating with instruments

https://labviewwiki.org/wiki/VIWeek_2020/Proper_way_to_communicate_over_serial

[Albert.Geven]

Hi

This instrument is perfectly programmable and readable via visa.

Look at the link Santhosh gave you in the previous message

[Ayoubas01]

Thank you for taking time to answer me, i try to send the command ":CATalog?" to read the list of extended but i cant get it 

with error (tome out)

[Albert.Geven]

Hi

Please send a vi saved with all frontpanel settings. And eventually a copy of the errormessage.

I believe you have to add a linefeed after the command to get a result.

And why do you use DCI on for handshaking?

Which version of LabVIEW are you using so I can send a simple example that does a read on the instrument.

[Ayoubas01]

Hi 

this is my simple program to acquire data using Vi but does not work , only error 1210 

i use the 2019 version 

with visa does not work with me, even i succelfully communicate with instrument on the test pannel of MAx

[Albert.Geven]

Hi

Nice vi but I miss 3 subvi's that can tell me what is wrong

[Ayoubas01]

this the LLB drivers on labVIEW from the officiel website of the Metrix 

for MTX3293

can you confirm for me if the sub VI are correct , and can communicate with my instrument i will be very grateful to unlock me in this situation   

thank you