From 11:00 PM CST Friday, Feb 14th - 6:30 PM CST Saturday, Feb 15th, ni.com will undergo system upgrades that may result in temporary service interruption.

We appreciate your patience as we improve our online experience.

Instrument Control (GPIB, Serial, VISA, IVI)

cancel
Showing results for 
Search instead for 
Did you mean: 

Communication to Vötsch oven

Hello, how to communicate to a Vötsch oven?

(in the past the name of the company was: "Haraeus Vötsch"     now: www.weiss-technik.com)

-------------------------------------------------------------------
Eugen Wiebe
Bernstein AG
CLAD - Certified LabView Associate Developer
0 Kudos
Message 1 of 25
(10,005 Views)

In this attached document there are two communication protocols described: ASCII-1 or ASCII-2.

Most ovens, as I have seen, communicate over ASCII-2 (e.g. $00I<CR>)

-------------------------------------------------------------------
Eugen Wiebe
Bernstein AG
CLAD - Certified LabView Associate Developer
0 Kudos
Message 2 of 25
(10,003 Views)

This link can also be helpful:

http://www.basytec.de/applications/climate.pdf

Vötsch comms.jpg

-------------------------------------------------------------------
Eugen Wiebe
Bernstein AG
CLAD - Certified LabView Associate Developer
0 Kudos
Message 3 of 25
(10,001 Views)

If the oven has a RS232 (25pin) connector (like the VT4010 / VT4020) this is the pinout:vötsch 25pin pinout.jpg

 

-------------------------------------------------------------------
Eugen Wiebe
Bernstein AG
CLAD - Certified LabView Associate Developer
0 Kudos
Message 4 of 25
(9,998 Views)

In this operating manual also the communication method is described:

http://doc.es.aau.dk/fileadmin/doc.kom.aau.dk/labs_facillities/control/manuals/VT4002_climate_chambe...

 

It is equal for many Vötsch (Votsch) ovens.

 

similar:

Communication protocol of VC7xxx

-------------------------------------------------------------------
Eugen Wiebe
Bernstein AG
CLAD - Certified LabView Associate Developer
0 Kudos
Message 5 of 25
(9,992 Views)

Hello EWiebe,

 

thanks for sharing the informations. Do you had some additional questions?

best regards
Alexander
0 Kudos
Message 6 of 25
(9,945 Views)