From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.

We appreciate your patience as we improve our online experience.

Home Community Discussion Forums Most Active Hardware Boards Instrument Control (GPIB, Serial, VISA, IVI) Topic

Instrument Control (GPIB, Serial, VISA, IVI)

cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

如何将GPIB-USB-HS用作从机端GPIB接口

如何将GPIB-USB-HS用作从机端GPIB接口

‎05-20-2022 03:02 AM

我两根GPIB-USB-HS通过转接线相连，主机端的GPIB-USB-HS设置为GPIB0，主地址为2，并使能系统控制器功能；从机端的GPIB-USB-HS设置为GPIB0(或者GPIB1)，主地址为6，并将该设备的VI_ATTR_GPIB_SYS_CNTRL_STATE设置为VI_FALSE。此时在主机端进行设备扫描，发现不能识别地址为6的从机GPIB接口。应该怎么设置使得主机端可以识别到从机的GPIB设备

0 Kudos
Message 1 of 1
(578 Views)
Reply