cRIO-9114 Chassis "high speed interface slot"

[Microtec]

Hi,

I use a NI-9114 Chassis (8 slots) with a NI-9022 Compact RIO controler.

I need to use 6 devices in "FPGA" mode, is it possible ?

=> One EnDat Device (S.E.A) (Absolute encoder interface)

=> Three NI-9516 Device (Drive interface)

=> One NI-9401 Device (Digital I/O module)

=> One NI-9263 Device (Analog Output module)

I saw that Devices used in "FPGA" mode need "High Speed" interface slot on cRIO Chassis, I'm right ?

If Yes, how many slots can we use to drive devices in "FPGA" mode ?

Thanks for your answer.

[Microtec]

Hi,

[Microtec]

I use a NI-9114 Chassis (8 slots) with a NI-9022 Compact RIO controler.

[Microtec]

I need to use 6 devices in "FPGA" mode, is it possible ?

[Microtec]

=> One EnDat Device (S.E.A) (Absolute encoder interface)

[Microtec]

=> Three NI-9516 Device (Drive interface)

[Microtec]

=> One NI-9401 Device (Digital I/O module)

[Microtec]

=> One NI-9263 Device (Analog Output module)

[Microtec]

I saw that Devices used in "FPGA" mode need "High Speed" interface slot on cRIO Chassis, I'm right ?

[Microtec]

If Yes, how many slots can we use to drive devices in "FPGA" mode ?

[Microtec]

Thanks for your answer.

[SAMUEL_NIF · Accepted solution]

Hello,
You could use the entire Cseries module on FPGA mode. Be careful for the module 9516 :

http://digital.ni.com/public.nsf/allkb/C43C73FE11BE740A8625763C006CC3ED?OpenDocument

Regards

[Microtec]

Hello Samuel,

Thank's for yous help.

Best Regards,

Christophe B.