Hardware Developers Community - NI sbRIO & SOM

Reply
This is an open group. Sign in and click the "Join Group" button to become a group member and start posting.
Highlighted

sbRIO-9651 SOM IO Interface and CLIP Generator.pptx

This presentation covers what a CLIP is, how to navigate through the sbRIO CLIP Generator, and how to import a socketed CLIP into your LabVIEW Project.

Tannerite
National Instruments
Message 1 of 11
(8,676 Views)
10 REPLIES

回應: sbRIO-9651 SOM IO Interface and CLIP Generator.pptx

 Hi, Sir

 

This is Ian from NITW, I use sbRIO-9607, then I need 2 RS-232 port to use VISA, but when I finish the CLIP generator, I can't find the socket in my project, so I don't know how to Import the CLIP, (as the ppt's page 38).

 

What's wrong in my way? thanks.

0 Kudos
Message 2 of 11
(5,190 Views)

回應: sbRIO-9651 SOM IO Interface and CLIP Generator.pptx

If I understand you correctly, you cannot find the RMC Socket project item in your LabVIEW project. Is that correct? Can you attach a screenshot of your project? It should appear under your FPGA project item.

 

20170616105047.png

0 Kudos
Message 3 of 11
(5,186 Views)

回應: sbRIO-9651 SOM IO Interface and CLIP Generator.pptx

Add my Attach screenshot, thanks.

0 Kudos
Message 4 of 11
(5,156 Views)

回應: sbRIO-9651 SOM IO Interface and CLIP Generator.pptx

I can not choose the CLIP which I generated.

0 Kudos
Message 5 of 11
(5,145 Views)

回應: sbRIO-9651 SOM IO Interface and CLIP Generator.pptx

You've already added the digital RMC (9694) to your project, as shown below circled in red. If you remove that, you'll see the RMC socket appear.

 

Image 3.png

 

0 Kudos
Message 6 of 11
(5,117 Views)

回應: sbRIO-9651 SOM IO Interface and CLIP Generator.pptx

Thanks, Deagle.

 

It's really help.

0 Kudos
Message 7 of 11
(5,030 Views)

Re: sbRIO-9651 SOM IO Interface and CLIP Generator.pptx


PowerPoint Slide for ASRLx..INSTR.png

 

@tannerite wrote:

This presentation covers what a CLIP is, how to navigate through the sbRIO CLIP Generator, and how to import a socketed CLIP into your LabVIEW Project.

Hi tannerite,

 

I have a very related problem with this issue in my project, my hardware is NI sbRIO9607. I want to use the RS232 serial interface provided by Labview Clip Generator and I have also done all the necessary assignments written. But I could not find any way to access to the created port (serial nor parallel created by Clip Generator), with VISA or MAX. All DIO pins are working correctly without using in a Clip Generator serial port. However, only the ASRLx::INSTR ports could be accessed via MAX or VISA. According to the quote from your publication which I put to the beginning, I understand that ASRLx::INSTR ports are the corresponding Serial Ports. However there is no data communication sensed while I am testing the pins by this assignment (i.e. I considered Serial2 is ASRL2::INSTR , and all of the other ASRLx::INSTR ports are also tested whether one of them might be the Serial2 port or not). I put screenshots below.

 

How could I access this Clip Generator ports, could you please help me?

 

Thank you very much,

Best Regards,

 

Onur YILDIZ

Real Time Code.pngRT VI Code

sbRIO Clip Generator.pngClip Generator Configuration

 

Clıp Summary.pngClip Generator SummaryRMC Socket Properties.pngRMC Socket Properties ConfigurationProject.pngProject ExplorerReal Time Interface.pngRT VI InterfaceMAX.pngNI MAX Interface

0 Kudos
Message 8 of 11
(4,028 Views)

回應: sbRIO-9651 SOM IO Interface and CLIP Generator.pptx

Hi!

Could it be possible to use the additional serial (ASLR:2) while using the RMC card. In my case, I'm using RMC 9694 but whenever I add RMC card my "Socketed Clip" disappears. Can you please tell me the way out?

 

Thanks


@Deagle wrote:

You've already added the digital RMC (9694) to your project, as shown below circled in red. If you remove that, you'll see the RMC socket appear.

 

Image 3.png

 


 

0 Kudos
Message 9 of 11
(672 Views)

回應: sbRIO-9651 SOM IO Interface and CLIP Generator.pptx

Hi!

I'm having the similar problem. Could it be possible to use the additional serial pin (ASLR:2) simultaneously with the RMC card. In my case, I'm using 9694 but whenever I add the RMC card my "Socketed Clip" removes from the project. Can you please tell me the way out to simultaneously used both of them.  My application requires two serial ports.

 

Thanks

 

0 Kudos
Message 10 of 11
(671 Views)
Reply
This is an open group. Sign in and click the "Join Group" button to become a group member and start posting.