Forum Italiano sui Prodotti NI

cancel
Showing results for 
Search instead for 
Did you mean: 
Reply

Connect adxl001 mems accelerometer to NI 4497 PXI-e card

Hi everyone,

i'm currently using the NI 4497 PXI card to acquire from pcb ICP accelerometer.

Is it possible to connect the adxl001 mems accelerometer to the pxi-4497 card (see link)?

http://www.analog.com/media/cn/technical-documentation/evaluation-documentation/EVAL-ADXL001.pdf

 

Should i connect its analog output to the 4497 with bnc connection and use external power supply?

 

Thank You

0 Kudos
Message 1 of 2
(1,084 Views)

Hi raffa.cap,
since the supply voltage of the accelerometer can rise up to 6V, I don't think there should be problems connecting sensor output with an NI 4497 input. According the manual,This PXI board allow to acquire signals with a voltage up to 10V.

 

If you want to use the BNC connector, this is the component you need:

- NI SHB4X-8BNC -> http://sine.ni.com/nips/cds/view/p/lang/en/nid/204002

 

regards,

 

Stefano Fois

0 Kudos
Message 2 of 2
(1,055 Views)