From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, will undergo system upgrades that may result in temporary service interruption.

We appreciate your patience as we improve our online experience.

FieldPoint Family

Showing results for 
Search instead for 
Did you mean: 

Old Fieldpoint controllers not talking to our 2023 Q3 front end software through TCP-IP

Hello all of you Fieldpoint people out there!

We have run into a Fieldpoint communication issue while migrating our front end software from 2015 to 2023Q3 for a windows 11 site upgrade.

We have two sets of fieldpoint controllers. The 2200s are running a 2015 software version and we are having no communication issues with these. Then we have about 6 older units (2110s and 20s) running a version called 8.5. On these older controllers, we can see the controller in max, but we can't see any of the temperatures, flows or reservoir level that those controllers monitor.

I was wondering if anything changed in the IP protocols/communication between 2015 and 2023Q3 that could be responsible for bricking our stands?


Thanks in advance for your thoughts and consideration.



0 Kudos
Message 1 of 1