FIRST Robotics Competition Discussions

cancel
Showing results for 
Search instead for 
Did you mean: 

Please Help, code / robot / driver station / joystick Problem

Hi,

I have recieved confirmation that I have successfully re-imaged the cRIO.

I have installed the Labview, Driver Station, and Utillities updates today then ran all the tests.

I then ran the provided Servo Example code in the FRC examples link on the Labview Welcome screen and the servo worked perfectly.

Then I attempted my own code for motors (didn't work), then the provided Arcade Example (didn't work), and then the provided Motor Example code which did not require a joystick (didn't work).

The Code:

Each of the codes were set to the correct team IP.

Not sure if it was working right (but 2 of them were provided).

The on code configurations were correct,

The Robot:

The control wire was correctly inserted in the Victor and PWM 1 on the Digital Side Car.

The Victor had power.

I even tried 2 different Victors.

The Victor light keeps flashing orange.

Everything else seems to be communicating and wired correctly.

The Driver Station / Joystick:

Registering the joystick as beeing in USB 1.

No errors in the error log.

Getting code and enabling correctly.

Team number is displaying correctly.

Thanks,

Davis Catherman

0 Kudos
Message 1 of 2
(4,456 Views)

uhh, well yesterday it just decided to work. I don't know why but nor do I care as long as it never happens again...

Davis Catherman

0 Kudos
Message 2 of 2
(2,650 Views)