Monitor Battery Voltage Level with Driverstation

[Team 4376]

Is it possible to be able to monitor your battery's voltage level with driverstation?

[Kevin_F]

The driver station should do this by default (in the upper right there should be an indicator showing the current battery voltage).

[sciencewhiz]

It's in the upper left. For it to work, you have to follow R64.

[Omar_II · Accepted solution]

Also see page 12 of the "Getting Started with the 2012 FRC Control System"

[LockheedJoe]

Also, on the right there is a button that says "Charts". That will show a chart of battery usage, along with lag and a few other things.

[Jeff_Techau]

Also, make sure you have a 9201 plugged into Slot 1, and not a 9472.  Careless team members have been known to make that mistake.