Learn roboRIO and LabVIEW At Your Own Pace

[robo_Jeff]

Learn roboRIO and LabVIEW At Your Own Pace

Click the blue boxes below!

NI LabVIEW for FRC Programming Fundamentals Training Start here to learn the systems engineering software environment + key functions and features

FUNdamentals of LabVIEW for FRC Watch this 4-part Twitch series covering basic LabVIEW programming to advanced vision processing

NI LabVIEW for FRC RIO Programming Training Get serious with real-time RIO programming and advanced architectures for FRC robotics NI LabVIEW Control: Vision and PID Training Give your robot eyes, improve control, and level up NI roboRIO Training and Specifications No programming needed – just dive into the INs and OUTs of the NI roboRIO

[Ha-Dream_Team_FRC3075]

Hello, we are from FRC Team 3075

We tried to update our roboRIO from 2018 to 2019 version and we had a problem, now our roboRIO status led is blinking continuously.

We are trying to contact NI, but we are from Israel so the hours are kind of difficult.

Are there any tips to solve this problem?

Here is the error message for format target:

Here is the error message for update firmware:

Thank you for any help

[Bryan.rogers]

We have our robot programmed and were working with timed sequences. We have a code in periodic. In Teleop the timed sequence code works well without anything else working. However, in periodic, it acts like it wants to work, but only bumps the motors as if the time is really short. What are we missing?

Thanks, team 8507