05-06-2020 12:37 PM
Recently I have been struggling with my FRC roboRIO's imaging sequence, as whenever I attempt to format it, it fails. The message from the Imaging Tool included in FRC Game Tools reads
Unable to download image to target.
NI System Configuration: Cannot open file or folder.
Complete call chain:
Status: corrupt firmware, cannot run
I have tried the given solution, and did not want to spend writing them down. I have also tried the NI MAX which failed as well. I have read several other threads, and I still have yet to find one with an error like mine. I am really, really lost and would appreciate any help.
Solved! Go to Solution.
05-07-2020 03:41 PM
I'm likely going to ask some questions that you've already tried. I'm not sure what you've read to provide given solutions so I won't know which things you've tried.
What is the status light on the roboRIO doing?
You've tried MAX. Did you do this in Safe Mode with a Format or did you do something else?
What's the name of the roboRIO in MAX?
Have you tried multiple PCs?
Are you connected via Ethernet or USB?
Is this a fresh roboRIO or are you upgrading an install from past seasons?
05-07-2020 04:10 PM
I solved the issue. I apologize for forgetting about this post. Thank you for the response however! I solved it by running the following command and rebooting.
nisystemformat -f -t ubifs && nisystemformat -f -t ubifs -c