From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
Team 5430 Our Serial number is not working. What do we do?
Hi Team5430,
Great question! Please post it as a new topic in our FRC Support Forums here (and top blue box above). It's the best place to get NI technical support outside of "normal" business hours.
Good luck this season! 😊🤖
Hi robo_Jeff,
Team 1099 uninstalled last years Labview and installed the new Labview FRC 2020 and ran into a problem when using the Command and Control project. When I opened my project, I right click on RoboRIO target and click on New >> Subsystem but there is no popup. Instead there is a new item called VI-Based Object with a Question Mark Icon next to it shows up in the folder tree.
I tried this with a brand new clean project and also last years updated project - same result. Note: I am still in evaluation mode.
Can you shed any light on this? I also posted this to the Community. https://forums.ni.com/t5/FIRST-Robotics-Competition/Create-a-New-Subsystem-Not-Working-in-FRC-2020/t...
Thanks,
Hello downloaded labview for frc and downloaded frc tools. after rebooting computer only the basic labview executes its like its not linking to the frc tools....