Writing a Power Spectrum Measurement to a DIAdem Report Using LabVIEW

[Adri_K.]

Overview
This example VI uses the LabVIEW DIAdem Express VIs you can configure your application to create a DIAdem report that displays a signal acquired from within the LabVIEW environment.

 
Description
Create a DIAdem report that displays a signal that is acquired from LabVIEW. This example has 3 parts. The first part is the generation of a signal in LabVIEW(combination of a sine wave and white noise). The second part of the VI is turning the signal into a waveform. The last part consists of a LabVIEW DIAdem Express VI that is used to generate a DIAdem report and can be customized depending on the available data. 

Requirements

• LabVIEW 2012 (or compatible)
• DIAdem 2012

Steps to Implement or Execute Code

1. Generate a sine wave
2. Add white noise
3. Compute and display the averaged power spectrum
4. Convert the averaged power spectrum to a waveform
5. Display in a DIAdem report

Additional Information or References
VI Block Diagram

 

 **This document has been updated to meet the current required format for the NI Code Exchange.**

[高扬]

技术支持，服务态度很好！