Example Programs

cancel
Showing results for 
Search instead for 
Did you mean: 

Multiple PWM Generator

Description
This application demonstrates how to use DAQmx to create multiple PWM channels and have runtime-control over Frequency and/or Duty Cycle.
 
Steps to implement or execute code
To implement this example:
  1. Set the physical channel of the counter
  2. Determine the frequency
  3. Run the VI
  4. (Optional) Turn on the Highlight Execution to see the flow of the VI

To execute this example:

  1. Install the required software.
  2. Connect the DAQ hardware that supports the Counter features
  3. Confirm the connection with the MAX with TestPanel
  4. Open the VI and refer the Implement Steps


Requirements
Software
LabVIEW 2012 or compatible
NI-DAQmx 16.0 or compatible

Hardware
cDAQ with C series Counter Input Module

2017-10-30_16-08-49.jpg2017-10-30_16-08-38.jpg

 
**This document has been updated to meet the current required format for the NI Code Exchange.**
Mark B

===If this fixes your problem, mark as solution!===