Overview The example will shows how to utilize the nibble DI/O configuration on the 9401 to trigger an analog task.
Description: The VI would walks you through the instance of utilizing the nible DIO of the 9401. Using the DAQmx functions and trigger, it would then wait a user selected delay and eventually would start the AI acquisition and finish by resetting the DO line to False after the trigger occurs
Steps to implement or execute code To implement this example:
Configure the channels
(Optional) Specify the rest of the parameters as needed
Run the VI
(Optional) Turn on the Highlight Execution to see the flow of the VI
To execute this example:
Install the required software.
Connect the DAQ hardware that supports the Digital IO and Analog Input features
Confirm the connection with the MAX with TestPanel
Open the VI and refer the Implement Steps
Requirements Software LabVIEW 2012 or compatible NI-DAQmx 9.0 or compatible
Hardware cDAQ with C series Analog Input and Digital IO Module
**This document has been updated to meet the current required format for the NI Code Exchange.**