Example Code

Analog Input with 73xx Motion Card using LabVIEW

Products and Environment

This section reflects the products and operating system used to create the example.

To download NI software, including the products shown below, visit ni.com/downloads.

    Hardware

  • Motion Control

    Software

  • LabVIEW

Code and Documents

Attachment

Download All

Description

Overview

This example demonstrates how to read the analog input from a 73xx card using NI Motion.

 

Description

The following example shows how to acquire analog input on an NI 73xx Motion Card. 
The corresponding calculation can be found in the manual page 4-11: National Instruments 7340 User Manual and Specifications

 

Requirements

 Software

  • LabVIEW Base Development System 2012 (or compatible)
  • NI-Motion 15.0 (or compatible)

 Hardware

  • NI Motion Card 73xx

Steps to Implement or Execute Code

  1. Run the VI.

Additional Information or References

7344 analog input.vi - Front Panel.png


7344 analog input.vi - Block Diagram.png

 

**The code for this example has been edited to meet the new Community Example Style Guidelines. The edited copy is marked with the text 'NIVerified'. Read here for more information about the new Example Guidelines and Community Platform.**

Tejinder Gill
National Instruments
Applications Engineer
Visit ni.com/gettingstarted for step-by-step help in setting up your system.

Example code from the Example Code Exchange in the NI Community is licensed with the MIT license.