From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
NI 9505 Full H-Bridge Brushed DC Servo Drive Module
DC Brushed Servo Drive
In this project I developed a demo using FPGA and NI-9505 Module to reproduce a set of 5 sequence positions in memory. This could be used for example to open a safe box given a sequence of the positions.
I used some example codes from LabView and created my own progamming to complement this project
Regards
Jaime Peña National Instruments Mexico Ingeniería de Aplicaciones www.ni.com/soporte
Example code from the Example Code Exchange in the NI Community is licensed with the MIT license.
Thanks. Could you please advice on where I can find the 9505 DC brushed position (PID) closed loop FPGA target? I worked on it before in some previous version but in the current 2013SPI, it all about softmotion approch!