Virus scan in progress. Please wait to download attachments.
Overview The example is to demonstrate how to insert the frequency parameters while the VI is already running
Description: Using the event structure, the VI would work to generate a pulse train signal with a pre defined frequency and would change the output's frequency as soon as the user change the parameters while the VI is running
Steps to Implement or Execute Code:
To implement this example:
Define the Output Physical Channel
Set the value of the parameters as needed
Run the VI
(Optional) Turn on the Highlight Execution to see the flow of the VI
To execute this example:
Install the required software.
Connect the DAQ hardware that supports the Counter features
Confirm the connection with the MAX with TestPanel
Open the VI and refer the Implement Steps
Requirements Software LabVIEW 2012 or compatible NI-DAQmx 16.0 or compatible
Hardware cDAQ with C series Counter Output Module
**This document has been updated to meet the current required format for the NI Code Exchange.**
Patrick Corcoran Application Engineering Specialist | Control National Instruments
Example code from the Example Code Exchange in the NI Community is licensed with the MIT license.