12-04-2007 03:14 PM - edited 12-04-2007 03:15 PM
12-04-2007 03:21 PM
I'm not familiar with RIO (as it's not what I work with) that much, but the error code's definition seems to be pretty easy to understand.
http://zone.ni.com/reference/en-XX/help/371599A-01/lvfpgahost/fpgainterface_error_codes/
You might think of posting in another forum, possibly the LabVIEW one http://forums.ni.com/ni/board?board.id=170 to get some more exposure.
Good luck!
Gavin Goodrich
Software Engineer
National Instruments
12-04-2007 07:09 PM
05-20-2013 05:55 AM
The answer looks like the information that I need. This is the only return when searching for "ERROR code -61073." Sadly the link is dead! 😞
07-15-2014 07:18 AM
I had the same problem.
The solution is simple. Memory reserved for the data was too small in relation to their counts. Parameter "depth" must be greater than "number of elements".