06-20-2011 07:19 AM
Hello,
i want to enable in labview axis 1 and 3 on the NI UMI774.
I can't find it in the manual.
It's probably an easy question, but who can help me.
This is the schematic:
08-15-2011 08:08 AM
Hallo,
Page 56 of 63 in the User Manual improperly labels the Axis Enable Outputs as Axis Inhibit Outputs. The drawings and images embedded in the User Manual all refer to these outputs as Axis Enable Outputs (pg. 35, 36, 37, etc.). Although they really mean the same thing, it is confusing to the customer.
1. Open the following link: http://forums.ni.com/attachments/ni/AEWorldWide/27291/1/UMI%207774%207772%20UMan.pdf
2. Browse to page 56
Good luck