Driver Development Kit (DDK)

cancel
Showing results for 
Search instead for 
Did you mean: 

Digital out active at power up (S-Series 6133)

Hi all,

 

for my application it is nessesary to have an digital output set to 1 at power up of a 6133 S-Series card.

Usually, the pins are set as an input which does not help.

 

Is there any possibility to program the flash of the card to make it a high output?

 

Many thanks for your help

DAQ-Guy

0 Kudos
Message 1 of 2
(5,966 Views)

DAQ-Guy wrote:

 

for my application it is nessesary to have an digital output set to 1 at power up of a 6133 S-Series card.

Usually, the pins are set as an input which does not help.

 

Is there any possibility to program the flash of the card to make it a high output?


 

No, unlike X or M Series devices, the S Series devices, including the NI 6133, do not have programmable power-up states for its digital lines.

Joe Friedchicken
NI Configuration Based Software
Get with your fellow OS users
[ Linux ] [ macOS ]
Principal Software Engineer :: Configuration Based Software
Senior Software Engineer :: Multifunction Instruments Applications Group (until May 2018)
Software Engineer :: Measurements RLP Group (until Mar 2014)
Applications Engineer :: High Speed Product Group (until Sep 2008)
0 Kudos
Message 2 of 2
(5,961 Views)