Distributed Control & Automation Framework (DCAF)

Reply
This is an open group. Sign in and click the "Join Group" button to become a group member and start posting.
Highlighted

Distributed Control and Automation Framework (DCAF) Developers Guide

Today we are releasing the first edition of the Distributed Control and Automation Framework (DCAF) Developers Guide, attached to this forum post. Whether you are a first-time or veteran user of DCAF, the guide will be a helpful resource for writing embedded applications using the framework.
 
The guide covers the following DCAF topics:
  1. Overview of the major components and how they fit together.
  2. Guidance on software design best practices for embedded applications, including guidance on when to build new plugin modules.
  3. Creation of a new application with the framework and execution templates.
  4. Creation of new modules from project templates and extensions for your application.
  5. Distribution and collaboration guidelines for contributors.
 
We strongly encourage you to refer to this guide when creating your embedded control applications. If you have feedback, suggestions, or comments please reply to this post. We also welcome feedback in the form of issues in the LabVIEW-DCAF/Documentation repository on github, found here: https://github.com/LabVIEW-DCAF/Documentation
 
Happy Coding!
Message 1 of 4
(4,918 Views)
3 REPLIES 3

Re: Distributed Control and Automation Framework (DCAF) Developers Guide

There is excellent documentation on the DCAF here, but, in my humble opinion, it takes far too much browsing to find tutorial (NI calls it Hands On) information to really get started. Perhaps part of my difficulty is that I searched for DCAF Tutorial, but it's called Hands On.

 

For instance, this page might be the launching point that many start from, but the tutorial is not listed here.

http://sine.ni.com/nips/cds/view/p/lang/en/nid/213988

 

The tutorial / Hands On, as I've finally stumbled into by accident, is found at:

https://github.com/LabVIEW-DCAF/Documentation/blob/master/Trunk/Getting%20Started%20Material/Hands%2...

 

The Getting Started page does make mention of the Hands On, but the link is broken on this page:

http://www.ni.com/tutorial/54342/en/

 

 

0 Kudos
Message 2 of 4
(1,876 Views)

Re: Distributed Control and Automation Framework (DCAF) Developers Guide

Hi Wireman, yes the link is broken and we just moved the Hands on to this new location and we just updated the format by splitting it into smaller hands on. Thanks for your feedback, and we are working on making things easier to find. 

Benjamin C
Principal Systems Engineer // CLA // CLED
0 Kudos
Message 3 of 4
(1,873 Views)

Re: Distributed Control and Automation Framework (DCAF) Developers Guide

Hey wireman,

 

I've just updated the link in the Getting Started page (http://www.ni.com/tutorial/54342/en/), and we're looking into the Tools Network Page.

 

Thank you for providing us with this specific feedback!

Andrew T.
"His job is to shed light, and not to master" - Robert Hunter
0 Kudos
Message 4 of 4
(1,821 Views)
Reply
This is an open group. Sign in and click the "Join Group" button to become a group member and start posting.