Digital Multimeters (DMMs) and Precision DC Sources

cancel
Showing results for 
Search instead for 
Did you mean: 

Trouble using NI USB-4065 with VMWare virtual machine

Solved!
Go to solution

Hi,

I'm going to work with a virtual machine (windows xp) and I need to use a DMM NI USB-4065.

When I connect the USB-4065 to the PC, the virtual windows xp recognize the new HW and also MAX display the new device on the DAQmx list.

It appears ok but if i try to use the USB-4065 (opening the soft frontpanel or in a LabView VI), the device doesn't work.

If I use the soft frontpanel, when i click one botton, the panel seems work but doesn't measure anything; if I try to restart the softpanel, it doesn't work and "freeze" the panel's display.

If I use LabView, the VI return an error about maximum time of the mesurement.

I try to use the device on the real machine (not with VMware) and the USB-4065 works, whith soft panel and whith VI.

I upgrade the DMM's driver on the virtual machine, bat the device doesn't work again.

... I haven't others idea, someone can help me with this trouble?

 

Thank's, Sem.

0 Kudos
Message 1 of 9
(9,659 Views)

Hi,

 

- which kind of error do you receive (error code)?

- which version of windows xp service pack do you use?

 

Thanks for your reply.

Giuseppe.

0 Kudos
Message 2 of 9
(9,651 Views)

Hi,

thankyou Giuseppe.

 

I use VMware; the virtual machine is windows xp 32 bit SP3.

 

I repeat the trouble with Soft front panel and with LabView2009, and I attach relative images.

 

The only news is that I see the DMM works only the first time I read; if i try to change measure (whit Soft front panel) or if I re-run the VI in LabView, the DMM stopp to work.

 

Thankyou, by Sem.

 

Download All
0 Kudos
Message 3 of 9
(9,648 Views)

NI-DMM is not supported in virtualized environments.  There's a lot of hardware abstraction that virtual machines can't handle.  If you're using  an Intel Mac, Boot Camp is the only supported method (since it's not virtualized).

-John Sullivan
Problem Solver
0 Kudos
Message 4 of 9
(9,638 Views)
Solution
Accepted by topic author IronSem

Hi John,

this isn't a good news for my project but tankyou for information.

 

See you, by Sem.

0 Kudos
Message 5 of 9
(9,628 Views)

Dear all,

I have installed NI-DAQmx and NI DMM 14.0 drivers.

 

Windows 7 (64bit) recognizes the unit in device manager but Meausrement & Automation explorer does not.

 

What can I do?

 

Thank you,

 

Tomaz

 

0 Kudos
Message 6 of 9
(7,613 Views)

Tomaz, you need to give more information.

 

Are you using VMWare?

What version?

On what platform?

On what hardware?

Marcos Kirsch
Chief Software Engineer
NI Driver Software
0 Kudos
Message 7 of 9
(7,609 Views)

Hi,

two years ago, I had to sobstitute the NI DMM with another commercial DMM (I usec TekTronix), because of NI DMM can't be virtualized; last summer, I test the NI VirtualBench and now I'm thinking to replace my commercial instrument whith this.

VB is smart, small, easy to use, cheap and virtualized... I think that VB is one of the best USB HW Test invented until now, and the performance are sufficient for the most of standard measures. I suggest to use VB.

0 Kudos
Message 8 of 9
(7,598 Views)

Hi, thank you for the answer.

I have reinstalled the NI DMM 14 drivers. Now I can see something in the automation Explorer, but cannot start test panel software.

Please see picture for details.

 

0 Kudos
Message 9 of 9
(7,593 Views)