Digital Multimeters (DMMs) and Precision DC Sources

cancel
Showing results for 
Search instead for 
Did you mean: 

NI DMM PXI 4070 range overlap?

Solved!
Go to solution

We will shortly be using NI PXI 4070 DMM's.

 

I'm trying to establish how much over a resistance range that a resistance value may still be read,

For instance, could I measure a 105 Ohm resistor on the 100 Ohm range, or a 1050 Ohm resistor on the 1k range?

 

I can't see this information published anywhere.... and yes, I do have reasons for doing this 🙂

 

Thanks

Alan

0 Kudos
Message 1 of 3
(5,811 Views)

Hi Alan, 

 

The DMMs do have the ability to measure a signal that is a little above their range. There is a page in the DMM Help on Overrange that unfortunatly isn't displaying on the web so I have attached a screenshot of it. Depending on the Range and Function the DMM will usually allow measurements (with an Overrange warning) up to 105% of the range before returning NaN as results. 

Steve B

0 Kudos
Message 2 of 3
(5,808 Views)
Solution
Accepted by topic author AlanKnowler

Perfect answer - just what I was looking for thanks!

0 Kudos
Message 3 of 3
(5,802 Views)